Categories

System glitches and false alarms can be aggravating, and more importantly, could prevent your home security system from doing its job effectively. Thankfully, most problems, from false alarms to dead batteries, are straightforward to fix. Explore our recommendations for troubleshooting your home alarm system in Florence. We’ll help keep your family members safe and your system operating the way it should.

Test Your Home Security System In Florence

One of the most effective ways to troubleshoot your home’s security is to test it! The latest systems permit you to place them in test mode to keep you from prompting an emergency response from monitoring agents. Once in test mode, take these steps:

• Turn on your system as you normally would when heading out.
• Open a window or door protected by a contact sensor, or try to set off another device. Shut the window or door so it doesn’t trip the alarm as you reactivate the system.
• Let the alarm sound for 60 seconds to ensure communications with the security provider and to create an entry in the alarm activity log.
• Continue testing equipment as needed
• Inspect the alarm’s activity log to verify that everything’s working.

No need to worry, monitoring professionals can see that your alarm system is undergoing a test. Just make sure to switch off test mode when done. It’s smart to test monthly or anytime you change your home’s internet or phone provider.

Check The Positioning And Condition Of Motion Sensors

Although an essential element of your alarm system, motion detectors are well known for false alarms. Prevent them with a few basic troubleshooting steps.

• Perform a visual check. Are there things that could shift within the detection path of the sensor, like a window treatment taken by a breeze?
• Is the sensor clean? Dirt, cobwebs, and debris can lead to issues. Make sure the face is clean.
• Does the motion detector offer pet immunity you can turn on? Some can be set to ignore pets weighing up to 100 pounds.
• When was the battery changed? Low batteries may impact performance or cause false alarms.
• Is a heat source impairing the sensor? Too much heat from sunlight or a fireplace can set off an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Warnings

One of the great advantages of the latest home security systems is that they’ll tell you when batteries are running low. If your system has a mobile app or control panel, you’ll often discover alerts there. Depending on your alarm, you might hear an intermittent beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless devices have batteries that should be replaced every year or two. It’s best to keep batteries on hand and set a replacement schedule. Some systems also have a backup battery for the central control panel. This backup helps keep your system operating if you have a power outage and should charge back up once the electricity is working again. If it doesn’t recharge, you will need to replace it.

Troubleshooting Is Easy With ADT Home Security In Florence 

As the foremost name in home security, ADT builds systems that offer superior functionality and protection. Accessing test mode is simple through the ADT+ app or MyADT.com, and you’ll always receive updates when a battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfect for your Florence home and family. Call (843) 310-4058 or submit our form today!